410/410S Stainless Steel
WLD Steel is a leading manufacturer, supplier and exporter of the stainless steel 410/410S available in a number of different sizes and forms including pipe, tube, sheet, plate, bar, rod and other shapes like an angel, channel, circle, cut piece and so on.
410 Stainless steel is a type of low cost, heat treatable stainless steel for general-purpose, has been widely used where corrosion is not severe (air, water, some chemicals, and food acids, or highly stressed parts where needing the combination of strength and corrosion resistance such as fasteners and valve parts. 410S is the lower carbon version of Type 410. It offers improved weldability but lower hardenability recommended for corrosion resisting applications is the main consumption of automobile exhaust steam treatment device, boiler combustion chamber or, nozzle.
What’re the 410/410S available forms at WLD Steel?
|Sheet/Plate/Coil||Seamless Pipe/Tube||Welded Pipe/Tube||Round Bar||Formed Steel(Shaped)|
|ASTM A554||ASTM A276
410/410S Steel Equivalent Materials
410/410S Chemical Composition
|SS 410||11.50 – 13.50||≤1.50||≤1.00||≤ 0.75||0.08 – 0.15||0.04||0.02||Balance|
|SS 410S||11.50–13.50||1.00 max||1.00||0.20-0.55||0.08||0.040||0.030||Balance|
410/410S Mechanical Properties
|Grades||Tensile Strength (Mpa)||0.2% Offset Yield Strength (Mpa)||Elongation, % in 2″ (51 mm)||Hardening Response HRC|
|SS 410 / 410S||450– 510||205 – 290||20 – 34||38-45|