440C Stainless Steel

WLD Steel is a leading manufacturer, supplier and exporter of the stainless steel 440C available in a number of different sizes and forms including bar, rod and sheets. Stainless Steel 440 is a high carbon and high chromium Martensitic stainless steel. It’s characterized by good corrosion resistance in mild domestic and strong oxidation without lubrication environments. There are three types: 440A, 440B and 440C, among which the carbon content and hardness increase successively (A-0.75%, B-0.9%, C-1.2%). 440C is the most commonly used steel grade and 440F is the free cutting type based on 440C. 440C provides extremely high strength, hardness and wear resistance when in the hardened and tempered condition, and its hardness can up to 58HRC. The typical applications of 440C steel including ball bearings and races, bushings, cutlery, knife blades, pump parts, surgical instruments, valve seats etc.

What’s the 440C available forms and specifications at WLD Steel?

  • Sheet/Plate/Coil:ASTM A240, ASTM A480
  • Round Bar:ASTM A276, ASTM A479

440C Equivalent Grades

Standard SAE UNS JIS DIN NF GB
440C 51440C S44004 SUS440C X105CrMo17 Z100CD17 11Cr17

440C Chemical Composition

C Si Mn Ni Cr P S
0.95-1.20 1.00 1.00 1.00 16.00-18.00 0.04 0.03

440C Mechanical Properties

Grades Tensile Strength (Mpa) 0.2% Offset Yield Strength (Mpa) Elongation, % in 2″ (51 mm) Hardness, HB
440C 785 420 15 240