Cold Rolled Stainless Steel Sheet/Plate/Coil
As the name implies, stainless steel cold-rolled plate is a stainless steel plate produced by the cold-rolled process. We usually referred the thickness of less than 3mm for the sheet and more than 3mm for the plate. Stainless steel cold-rolled sheet/plate, coils and strip products have excellent corrosion resistance, good mechanical properties, processing properties and a variety of surface finishes, has been widely used in home appliances, petrochemical, medical equipment, automobiles, ships, precision electronics and other fields.
Cold rolled surface reprocessing allows the stainless steel surface to present a different finish, texture and color. The surface finishes of stainless steel cold-rolled plates include 2D, 2B, No.3, No.4, 240, 320, No.7, No.8, HL, BA, TR, hard state, embossed and other surface grades. It can be further processed by electroplating, electropolishing, etching, shot peening, coloring, coating and various combinations based on cold rolling.
As a supplier and manufacturer of stainless steel sheet, plate in compliance with ASTM, ASME and EN standards. WLD steel supply these products available in the type of 201, 304/304L, 316/316L, 430, 410S, 409/409L and duplex grade 2205, all our products can be re-process for bending, trimming, pickling, heat treatment, coated or others.
Thông số kỹ thuật: ASTM A240, ASTM A480
Surface finish: No1, 2D, 2B, BA, No 3, No4, No8, HL,
Size: 800-1300*0.2-3.0mm(Coil); 800-2000*0.2-100mm(Plate)
Các loại lớp có sẵn: 201, 304/304L, 316/316L, 317, 309S, 321H, 347, 409L, 904L, 2205
The size of Stainless steel cold rolled sheet/plate/coil
| Các loại bề mặt hoàn thiện | Sản phẩm | Nominal thickness,mm | Nominal width, mm | Plate Nominal length or Coil inner dia,mm | |
| No.2E | Thép tấm | Cắt cạnh | 1.4～6.5 | 730～1570 | 1000～12000 (Thùng) |
| Non edge-cut | 750～1600 | ||||
| Cuộn thép | Cắt cạnh | 1.4～6.5 | 730～1570 | 610 (Coil) | |
| Non edge-cut | 750～1600 | ||||
| Longitudinal cutting steel coil | 1.4～3.0 | 120～700 | 508/610 (Coil) | ||
| No.2D No.2B |
Thép tấm | Cắt cạnh | 0.20～3.0 | 730～1350 | 1000～5000 (Plate) |
| Non edge-cut | 750～1350 | ||||
| Cuộn thép | Cắt cạnh | 0.20～5.0 | 730～1570 | 508/610 (Coil) | |
| Non edge-cut | 750～1600 | ||||
| Longitudinal cutting steel coil | 0.20～3.0 | 120～700 | |||
| No.3 No.4 HL BA |
Thép tấm | Cắt cạnh | 0.20～3.0 | 730～1350 | 1000～9000 (Plate) |
| Non edge-cut | 750～1350 | ||||
| Cuộn thép | Cắt cạnh | 0.20～3.0 | 730～1570 | 508/610 (Coil) | |
| Non edge-cut | 750～1600 | ||||
| Longitudinal cutting steel strip | 0.20～3.0 | 120～700 | |||
